You are here: Home> News
Using the method of automatic transmission
First introduced and used in various speed automatic transmission bit method
P parking structure: only in the vehicle to a complete stop, can be linked into the block, put into the block, drive the wheels by mechanical device locking the wheels can not rotate. If the gear lever out of the position, must step under the brake pedal and press the locking button in the gear lever handle.
R reverse: only when the vehicle is stationary and the engine idling, can hang one reverse gear, the gear lever handle button, then the gear lever is moved into or out of the reverse gear. In the vehicle, not to mistake the gear lever hang into the R block, especially in the transmission is in the state of emergency, don't put R in front of block, as will the automatic transmission damage.
N neutral: with the ignition switched on state, the vehicle is stationary or speed below 5Km/h, hung in the gear, the gear lever will be locking electromagnet lock. If you want to remove the blocking, to depress the brake pedal, press the button on the handle, the speed is higher than 5Km/h, just press the button and the gear lever handle into or out of N block. D driver file: general can use this block, block position in D, the transmission control unit according to the vehicle speed and engine load and other parameters, control the transmission in the 1-4 block of free switch.
3 Po Road Profile: driving on the slope of the road can be linked into the gear, the transmission in the 1-3 block of automatic shift, but will not change into 4 gear, thus, improving the braking effect of the engine in the downhill.
3 Po Road Profile: driving on the slope of the road can be linked into the gear, the transmission in the 1-3 block of automatic shift, but will not change into 4 gear, thus, improving the braking effect of the engine in the downhill.
2 long file: meet the long slope road selected for this block, the control unit according to the change of the opening speed and solar term door, control of vehicle in 1, block 2, automatic shift, so as to avoid hang into high gear is not necessary, the braking effect of the engine by using the other hand to be better in the downhill when the.
1 steep profile: on the very steep slope road selected for this block, hang into the 1 block, cars in 1 gear driving state, but does not change the other 3 forward gears, this can ensure that there is enough power to climb, on the other hand, can maximize the use of the braking effect the engine in the downhill.
Chinabase Machinery is a group of manufacturing facilities, offering one-stop solution for mechanical power transmission products in China. We can supply a full-range of power transmission products, such as chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks. Our product range also covers locking assemblies (clamping elements/locking device), taper bushes, QD bushes, bolt-on hubs, torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod ends and yokes. Our products are used in many different industry sector, like in automation engineering, drive engineering, conveyor technology, Planetary Gearbox,assembly and handling technology, packaging industries, the beverage, food and medical engineering, pharmaceutical production, and laboratory equipment.
Article tags: Automatic transmission,Planetary Gearbox,Power Transmission.
